Showing posts with label tips. Show all posts
Showing posts with label tips. Show all posts

Tuesday, June 26, 2012

Top Important Tips To Save a Wet Cell Phone

A wet phone is a problem most of us experienced and I found that plenty people don't know how to save their phone from a disaster like this.
I heard about the rise story once and just the other day I mentioned it to someone to try on their Blackberry. Well, after 3 weeks of keeping his Blackberry in rise, it suddenly came alive again.

So I found a perfect post via tipsotricks.com site for some tips. Keep it in mind, if you the lucky one that it did not happened .... yet  :)


Instant Tips To Save A Wet Cell Phone

If you drop your cell in water, the first thing to do of course would be to take it out immediately. The more time it is immersed, the deeper inside the water will go, and the lesser your chances will be to recover it. So just grab your cell as fast as you can from water when encountered, and take it out.
Turn Off And Remove The Battery

Once you’ve taken out the cell, turn it off! Usually, phones will turn off automatically due to the water. If it didn’t turn off, then do so immediately! And not from the push and hold button! Remove the back cover immediately and take out the battery, as quick as you can.



The reason for that is, your phone has thousands of micro connections and wires running inside. Even asingle drop of water, if put at the precise location, would connect these wires.
Give A Freshwater Bath!

If you dropped your phone in salt water (in an ocean), or in a glass of juice or beer or coke , then you should rinse it in fresh water after removing the battery. Otherwise, the salts in the liquid would causecorrosion. You can use filtered or tap water for this purpose.


How To Dry The Phone?

Vacuum it – Once the battery is out, take a towel or a tissue, and dry off each bit of the cell you can reach. If you have a vacuum cleaner, try to suck out the water. This should do the trick for places such as charging orUSB ports etc.

Use a bowl of uncooked rice – Yes, a bowl of rice. Rice is a good absorbent. Completely submerging your phone in a bowl full of rice will suck out the moisture from the phone. Make sure the bowl is covered with a lid though. And keep the phone there for at least two days. You can also use silica granules, which you usually find inside medicine boxes. Silica is an excellent absorbent, but not as readily available as rice.


No Exposure To Air Or Sunlight!

Keeping the phone in sunlight will not help. It could cause heat damage. Besides, if you expose it to the air, it will corrode fast, just as a piece of wet iron will. Also, do not try to blow dry your cell with a hair dryer! Hot air will cause more damage than just the sun or just the air exposure.



Those were some of the basics you should know. Even after attempting all the tips above, your phone doesn’t work, you should consider selling your dead cellphone online. There are so many websites online, like USell, where buyers are willing to purchase dead smartphones at decent prices – no matter how bad is the condition of your cellphone.

Please do share more tips!


source:   tipsotricks.com 


Thursday, June 21, 2012

Avoid Computer Eye Strain and Keep Your Eyes Healthy


Being in front of a Laptop / PC screen all day, like myself, you sure feel the impact on your eyes. So after some search on Google I found this small utility, EyeDefender. I think there are a few cool apps similar to this but personally I like this one. It runs in your system tray and warn you on a preferred set time to relax or exercise your eyes a bit, for a minute or two and I think it surely works. You can also set what type of notification you would like to have. Click here to read more and to download it.

Now after you've done that click here and read more about some steps to relief those precious eyes of yours. 
A Summery of the steps:
1. Get a comprehensive eye exam.
2. Use proper lighting.
3. Minimize glare.
4. Upgrade your display.
5. Adjust your computer display settings.
6. Blink more often.
7. Exercise your eyes.
8. Take frequent breaks.
9. Modify your workstation.
10. Consider computer eye-wear.

And lastly, to avoid the strain and keep them healthy here's an interesting post too.

Would like to hear some of your own tips too.



Monday, September 5, 2011

Adjust Your Car Mirrors to Fully Cover Your Blind Spots

Since I saw this (originally post by Lifehacker a while back) , I can't help to notice how many car mirror's are not setup correctly and some have those little blind view things stick on their mirror's. I'm now used to this setup & can't go without it, even when I get into a rental, this is the 1st thing I set. The setup works so nice that as soon as the car disappears from my mid view mirror, it will be visible in the side view mirror & as soon as it disappear form the side view mirror, I can see the car next to me, so full view of the cars around me at all times without breaking a neck....

The way most drivers, and car makers, keep their side mirrors doesn't actually cover the blind spot outside the driver's vision. Car and Driver illustrates a car mirror setup that, once you get used to it, could prevent lane change freak-outs.
The auto magazine calls its mirror alignment diagram from a paper published in 1995 by the Society of Automotive Engineers (SAE). That paper suggested, basically, moving your side mirrors to point further out into adjacent lanes, a trick that can take some getting used to:

The paper advocates adjusting the mirrors so far outward that the viewing angle of the side mirrors just overlaps that of the cabin's rearview mirror. This can be disorienting for drivers used to seeing the flanks of their own car in the side mirrors. But when correctly positioned, the mirrors negate a car's blind spots. This obviates the need to glance over your shoulder to safely change lanes as well as the need for an expensive blind-spot warning system.

So the trick is to get the side mirrors aligned just outside what your rearview mirror covers, and rely on your own vision to cover the areas in your peripheral vision. Neat trick, but as the magazine (and their commenters) mention, you'll want to train yourself on a neighborhood road before taking this setup out on the interstate.

Those who have switched to the SAE’s approach swear by it, however, some drivers can’t adjust to not using the outside mirrors to see directly behind the car and miss being able to see their own car in the side mirrors. To them we say, “Have fun filling out those accident reports.”



Wednesday, August 31, 2011

Tips on filling up your car

Below you'll find some nice tips on filling up your tank, probably the most costly expense we have on a monthly basis. Except for these tips and / or throwing moth balls in your tank, remember to always drive economically to get the maximum value for your money. But this is a good start. So read what this guy has to say & see if it works for you:

"Some petrol guy"

My line of work is in petroleum for about 31 years now, so here are some tricks to get more of your money's worth for every litre. Here at the Marian Hill Pipeline where I work in Durban, we deliver about 4 million litres in a 24-hour period thru the pipeline. One day is diesel the next day is jet fuel, and petrol, LRP and Unleaded. We have 34-storage tanks here with a total capacity of 16,800,000 litres.

Only buy or fill up your car or bakkie in the early morning when the ground temperature is still cold. Remember that all service stations have their storage tanks buried below ground. The colder the ground the more dense the fuel, when it gets warmer petrol expands, so buying in the afternoon or in the evening....your litre is not exactly a litre. In the petroleum business, the specific gravity and the temperature of the petrol, diesel and jet fuel, ethanol and other petroleum products plays an important role.

A 1-degree rise in temperature is a big deal for this business. But the service stations do not have temperature compensation at the pumps.

When you're filling up do not squeeze the trigger of the nozzle to a fast mode. If you look you will see that the trigger has three (3) stages: low, middle, and high. In slow mode you should be pumping on low speed, thereby minimizing the vapours that are created while you are pumping. All hoses at the pump have a vapour return. If you are pumping on the fast rate, some of the liquid that goes to your tank becomes vapour. Those vapours are being sucked up and back into the underground storage tank so you're getting less worth for your money.

One of the most important tips is to fill up when your tank is HALF FULL.

The reason for this is, the more fuel you have in your tank the less air occupying its empty space. petrol evaporates faster than you can imagine. Petroleum storage tanks have an internal floating roof. This roof serves as zero clearance between the petrol and the atmosphere, so it minimizes the evaporation. Unlike service stations, here where I work, every truck that we load is temperature compensated so that every litre is actually the exact amount.

Another reminder, if there is a fuel truck pumping into the storage tanks when you stop to buy, DO NOT fill up-most likely the petrol/diesel is being stirred up as the fuel is being delivered, and you might pick up some of the dirt that normally settles on the bottom. Hope this will help you get the most value for your money.